
Pattern Description:
The Wee Knit Pullover and Hat pattern is an easy skill-level knitting project that includes instructions for creating a pullover top and a matching hat.
It features a mesh stripe design. The pattern caters to sizes from 6 to 24 months, with detailed instructions for different dimensions for each size.
Materials Needed & Measurements:
- Yarn: Bernat® Softee® Baby™
- Yarn Weight: Available in 5 oz/140 g (362 yds/331 m) balls.
- Needles: U.S. 4 (3.5 mm) and U.S. 6 (4 mm) knitting needles, or the size needed to obtain gauge.
- Notions: 2 stitch holders, stitch markers, and 3 buttons.
- Measurements:
- To fit chest measurement:
- 6 mos: 17″ [43 cm]
- 12 mos: 18″ [45.5 cm]
- 18 mos: 19″ [48.5 cm]
- 24 mos: 20″ [51 cm]
- Finished chest:
- 6 mos: 20″ [51 cm]
- 12 mos: 21″ [53 cm]
- 18 mos: 22″ [56 cm]
- 24 mos: 23″ [58.5 cm]
- Hat is sized for: 6-12 (18-24) mos.
- To fit chest measurement:
Stitches & Abbreviations Used:
- Alt = Alternate
- Approx = Approximate(ly)
- Beg = Begin(ning)
- Cont = Continue(ity)
- Dec = Decrease(ing)
- Inc = Increase(ing)
- K = Knit
- K2(3)tog = Knit next 2(3) stitches together
- Pat = Pattern
- Rep = Repeat
- Rem = Remaining
- RS = Right side
- Ssk = Slip next 2 stitches knitwise one at a time. Pass them back onto left-hand needle, then knit through back loops together.
- St(s) = Stitch(es)
- WS = Wrong side
- Yo = Yarn over
Instructions for Making the Bernat Wee Stripes Knit Pullover And Hat Pattern:

Back:
- Cast On: With MC and smaller needles, cast on 55 (57-61-63) sts.
- Garter Stitch: Work 7 rows in garter st (knit every row), noting that the first row is a WS row.
- Change Needles: Change to larger needles.
- Stocking Stitch Initial Rows:
- 1st row: (RS). Knit.
- 2nd row: K3. Purl to last 3 sts. K3.
- Rep the last 2 rows until the work from beg measures 2 (2-2½-2½)” [5 (5-6.5-6.5) cm], ending on a WS row.
- Place Markers: Place markers at each end of the last row.
- Continue Pattern:
- Cont in st st for 4 rows (omitting 3 garter side sts).
- Proceed in Stripe Pat until the work from beg measures approx 6½ (7-7½-8)” [16.5 (18-19-20.5) cm], ending with 2 rows of A.
- Shape Raglan (Initial):
- Keeping cont of Stripe Pat, cast off 2 sts at beg of next 2 rows. You should have 51 (53-57-59) sts rem.
- 1st row: (RS). K2. K2tog. Knit to last 4 sts. ssk. K2.
- 2nd row: Purl.
- Keeping cont of Stripe Pat, rep the last 2 rows 2 (2-2-4) times more, ending with 2 rows of A. You should have 45 (47-51-49) sts rem.
- Break A.
- Shape Raglan (MC Only): With MC only, rep the last 2 rows 10 (11-12-11) times more.
- Hold Stitches: Leave the rem 25 (25-27-27) sts on a st holder.
Front:
- Work from to as given for Back. This means following steps 1-7 (initial shaping of raglan, ending with breaking A) from the Back instructions.
- Continue Shaping (MC Only): With MC only, rep the last 2 rows 5 (6-6-5) times more. You should have 35 (35-39-39) sts rem.
- Shape Neck (Right Side):
- 1st row: (RS). K2. K2tog. K6 (6-8-8) (neck edge). Turn. Leave rem sts on a spare needle.
- 2nd row: Purl.
- 3rd row: K2. K2tog. Knit to last 2 sts. K2tog.
- Rep the last 2 rows 1 (1-2-2) time(s) more. You should have 5 sts rem.
- Next row: P5.
- Next row: K2. K3tog.
- Next row: P3.
- Next row: K3tog. Fasten off.
- Shape Neck (Left Side):
- With RS facing, slip the center 15 sts onto a st holder.
- Rejoin MC to rem sts.
- 1st row: (RS). K6 (6-8-8). ssk. K2.
- 2nd row: Purl.
- 3rd row: ssk. Knit to last 4 sts. ssk. K2.
- Rep the last 2 rows 1 (1-2-2) time(s) more. You should have 5 sts rem.
- Next row: P5.
- Next row: K3tog. K2.
- Next row: P3.
- Next row: K3tog. Fasten off.
Sleeves (Make 2):
- Cast On: With MC and smaller needles cast on 31 (33-37-37) sts.
- Garter Stitch: Work 7 rows in garter st, noting that the 1st row is a WS row.
- Stocking Stitch: Change to larger needles and work 4 (4-4-6) rows in st st.
- Increase: Inc 1 st each end of the next row.
- Stocking Stitch Cont: Work a further 9 rows in st st.
- Stripe Pat & Increase: Proceed in Stripe Pat, AT THE SAME TIME, inc 1 st each end of the next row and following 10th row(s) 1 (1-1-2) time(s) more. You should have 37 (39-43-45) sts rem.
- Cont Even: Cont even in Stripe Pat until work from beg measures approx 7 (7½-8-8½)” [18 (19-20.5-21.5) cm], ending with 2 rows of A.
- Shape Raglans (Initial):
- Keeping cont of Stripe Pat, cast off 2 sts at beg of next 2 rows. You should have 33 (35-39-41) sts rem.
- 1st row: (RS). K2. K2tog. Knit to last 4 sts. ssk. K2.
- 2nd row: Purl.
- Keeping cont of Stripe Pat, rep the last 2 rows 2 (2-2-4) times more, ending with 2 rows of A. You should have 27 (29-33-31) sts rem.
- Break A.
- Shape Raglans (MC Only): With MC only, rep the last 2 rows 10 (11-12-11) times more.
- Hold Stitches: Leave the rem 7 (7-9-9) sts on a st holder.
FINISHING
- Seams: Sew raglan seams, leaving the left front raglan seam open.
- Neckband:
- With RS facing, smaller needles and MC, pick up and knit 7 (7-9-9) sts down the left front neck edge.
- Knit 15 from Front st holder, dec 1 st at center.
- Pick up and knit 7 (7-9-9) sts up the right front neck edge.
- Knit 7 (7-9-9) from right sleeve st holder, dec 1 st at center.
- Knit 25 (25-27-27) from Back st holder, dec 1 st at center.
- Knit 7 (7-9-9) from left sleeve st holder, dec 1 st at center. You should have 64 (64-74-74) sts.
- Work 8 rows in garter st.
- Cast off knitways (WS).
- Buttonhole Band:
- With RS facing, smaller needles and MC, beg at the raglan cast off edge, pick up and knit 25 (27-29-31) sts along the left front raglan edge and side of neckband.
- Knit 3 rows.
- Next row: (RS). K7 (7-7-9). K2tog. yo. K5 (6-7-7). Rep from once more. K2tog. yo. K2. This creates 3 buttonholes.
- Knit 2 rows.
- Cast off knitways.
- Button Band: Work as for Buttonhole Band along the left sleeve raglan edge, omitting all references to buttonholes.
- Assembly: Sew sleeve and side seams to markers to create side vents. Sew on buttons to correspond to the buttonholes.
HAT INSTRUCTIONS
Note: The Hat is sized for 6-12 (18-24) mos.
- Cast On: With MC and smaller needles cast on 87 (92) sts.
- Garter Stitch: Work 9 rows in garter st (knit every row), noting that the first row is a WS row.
- Increase: Inc 4 sts evenly across the last row. You should have 91 (96) sts.
- Change Needles & Stocking Stitch: Change to larger needles and work in st st until the work from beg measures 4 (4¼)” [10 (11) cm], ending on a purl row.
Shape Top:
- 1st row: (RS). K16 (17). K2tog. Rep from to last st. K1. You should have 86 (91) sts.
- 2nd and alt rows: Purl.
- 3rd row: K15 (16). K2tog. Rep from to last st. K1. You should have 81 (86) sts.
- 5th row: K14 (15). K2tog. Rep from to last st. K1. You should have 76 (81) sts.
- 7th row: K13 (14). K2tog. Rep from to last st. K1. You should have 71 (76) sts.
- Continue Decreasing: Cont in this manner, dec 5 sts evenly spaced as established on RS rows until 11 sts rem.
- Finish Top: Break yarn, leaving a long end. Draw the end tightly through the rem sts.
- Seam: Sew the center back seam.
Pompom:
- Wind Contrast A (A) yarn around 3 fingers approx 60 times.
- Remove from fingers and tie tightly in the center.
- Cut through each side of the loops.
- Trim to a smooth round shape.
- Sew to the end of the Hat.
Download Free PDF:
